业务咨询:020-82307670技术支持:18902214712

整机业务

产品详情

IBM POWER PS700 Blade Server
The IBM BladeCenter® PS700 blade server is based on IBM Performance Optimization with Enhanced RISC (POWER®) Architecture technologies. The BladeCenter PS700 blade server runs in BladeCenter units to provide a high-density, high-performance blade server environment using advanced processing technology.

Features and specifications

Features and specifications of the IBM® BladeCenter® PS700 blade server are summarized in this overview.

The PS700 Type 8406 is a single-wide (non-expandable) blade server. The PS700 blade server is used in an IBM BladeCenter H (8852 and 7989), BladeCenter HT (8740 and 8750), or BladeCenter S (8886 and 7779) chassis unit.
Notes:
  • Power, cooling, removable-media drives, external ports, and advanced system management are provided by the BladeCenter unit.
  • The operating system in the blade server must provide support for the Universal Serial Bus (USB), to enable the blade server to recognize and communicate internally with the removable-media drives and front-panel USB ports.
Core electronics:
  • 64-bit Power 7 processors (12S technology)
  • Four core, single socket (4-way) processors @ 3.0 GHz
  • 64 GB maximum in 8 very low profile (VLP) DIMM slots; Supports 4 GB DDR3 at 1066MHz, and 8 GB DDR3 at 800HMz

P5IOC2 I/O hub

On-board, integrated features:
  • Two 1 GB Ethernet ports (HEA) (two on each side)
  • SAS controller
  • USB 2.0
  • 1 Serial over LAN (SOL) console using FSP
FSP1 Service Processor - IPMI and SOL
  • The baseboard management controller (BMC) is a flexible service processor (FSP1) with Intelligent Platform Management Interface (IPMI), Serial over LAN (SOL), and Wake on LAN (WOL) firmware support.

Local Storage:

  • First DASD bay: zero or one 2.5" SAS HDD
  • Second DASD bay: zero or one 2.5" SAS HDD
  • SAS HDDs are 300 GB and 600 GB
  • Hardware mirroring

Daughter card I/O options:

  • 1 1Xe expansion card (CIOv)
  • SAS Pass-through using 1Xe
  • 1 High-Speed expansion card (CFFh)
Integrated functions:
  • RS-485 interface for communication with the management module
  • Automatic server restart (ASR)
  • SOL through FSP
  • Two Universal Serial Bus (USB 2.0) buses on base planar for communication with removable-media drives
  • Optical media available by shared chassis feature
Environment:
  • Air temperature:
    • Blade server on: 10° to 35°C (50° to 95°F). Altitude: 0 to 914 m (3000 ft)
    • Blade server on: 10° to 32°C (50° to 90°F). Altitude: 914 m to 2133 m (3000 ft to 7000 ft)
    • Blade server off: -40° to 60°C (-40° to 140°F)
  • Humidity:
    • Blade server on: 8% to 80%
    • Blade server off: 8% to 80%
PS700 Size:
  • Height: 24.5 cm (9.7 inches)
  • Depth: 44.6 cm (17.6 inches)
  • Width: 30 mm (1.14 inches)
Systems management:
  • Supported by BladeCenter chassis management module
  • Front panel LEDs
  • IBM Director
  • Hardware Management Console (HMC)
  • Integrated Virtualization Manager (IVM)
  • Energy Scale thermal management for power management/oversubscription (throttling) and environmental sensing
  • Active Energy Manager
Clusters support for:
  • IBM Director
  • xCat

Virtualization support for:

PowerVM® Standard Edition hardware feature, which provides the Integrated Virtualization Manager, Virtual I/O Server, and Director Power Systems™ Manager (DPSM).

Reliability and service features:
  • Dual alternating current power supply
  • BladeCenter chassis redundant and hot plug power and cooling modules
  • Boot-time processor deallocation
  • Blade server hot plug
  • Customer setup and expansion
  • Automatic reboot on power loss
  • Internal and ambient temperature monitors
  • ECC, chipkill memory
  • System management alerts

Electrical input: 12 V dc


Parts listing, Type 8406

The parts listing identifies each replaceable part and its part number.

Figure 1 shows replaceable components that are available for the PS700 blade server.

Figure 1. Parts illustration, Type 8406 . PS700 base unit with cover.

Replaceable components are of three types:

  • Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If IBM® installs a Tier 1 CRU at your request, you will be charged for the installation.
  • Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge, under the type of warranty service that is designated for your blade server.
  • Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.

For information about the terms of the warranty and getting service and assistance, see the Warranty and Support Information document for your blade server that is on the IBM BladeCenter® Documentation CD.

Table 1. Parts listing, Type 8406
Index Description CRU part number FRU part number Failing function code (FFC)
(Tier 1) (Tier 2)
  Base system-board and chassis assembly, with 1 POWER7® four core microprocessor     74Y1810 Various, seeFailing function codes 151 through 2E33
1 Cover 46C7341      
2 4x InfiniBand DDR Expansion Card (CFFh) for BladeCenter (option) 49Y9976      
2 Combo 4Gb Fibre Channel Expansion Card, 1 GB Ethernet Card, (CFFh/PCIe) (option) 39Y9304      
2 QLogic 8 Gb Fibre Channel and 1 Gb Ethernet expansion card (CFFh/PCIe) (option) 44X1943     2E12
2 QLogic 2 port 10 GB Ethernet FCoE Expansion Card, (CFFh/PCIe) (option) 42C1832      
3 3Gb SAS Passthrough Expansion Card (CIOv) (option) 46C4069     2506
3 QLogic 4Gb Fibre Channel 1Xe PCI-Express Expansion Card (CIOv) (option) 49Y4237     2E13
3 QLogic 8Gb Fibre Channel 1Xe PCI-Express Expansion Card (CIOv) (option) 44X1948     2E14
3 Emulex 8Gb Fibre Channel Expansion Card (CIOv) (option) 46M6138     2607
4 Bezel assembly with control panel 46K5760      
4 OEM Bezel assembly with control panel 46K4683      
5 DIMM filler 60H2962      
6 Memory, 4GB DDR3, 1066MHz VLP RDIMM (option) 77P8691     219

2C6

6 Memory, 8GB DDR3, 800MHz VLP RDIMM (option) 77P8692     219

2C6

7 Management card   74Y1978    
8 Tray, SAS hard disk drive 31R2239      
9 300GB 10K RPM SFF SAS HDD and screws (4) (option) 42D0628      
9 600GB 10K RPM SFF SAS HDD and screws(4) (option) 49Y2023      
  Hard drive filler 40K5928      
  Service Label 46K5891      
  IBM FRU/CRU Label 46K5893      
  OEM IBM FRU/CRU Label 46K5894      
  Cover warning label 90P4799      
  Miscellaneous parts kit 32R2451      
  3.0V Battery 33F8354      
  RFID Tag for North America, Latin America, Asia Pacific 46K5362      
  RFID Tag for Europe 46K5363      
  RFID Tag for Japan 46K5364      

在线提交需求

您也可发需求信息至邮箱：wangx@gzcloudinfo.com
  • 欢迎联系云鼎信息
  • 我们期待与您详细的沟通
  • 咨询专线:
  • 020-82307670
  • 早9：00－晚18:00（节假日除外）
  • 售后服务
  • 联系我们
  • 联系我们
  • 020-82307670
  • 传真：020-82327541
  • 邮 箱：xunjia@gzcloudinfo.com

Copyright 2011-2014 All Rights Reserved 广州云鼎信息技术有限公司 版权所有 粤ICP备18106638号

技术支持：英铭广州网站建设
 
QQ在线咨询

 技术

 销售

售前咨询热线
18902214712
微信扫一扫